The two “chosen ones”.

After owning a few “uber” vintage Strats, I’ve found a couple of great guitars that sit with the “good ‘uns”, and I think that my ears have really become sensitive to the differences between individual guitars of this particular model – now that I’m a Strat Cat again. A big reason for the re-visiting of my once favourite model, is that I now have the tools in the amplification department to get good gain at lower volumes – pretty much any sound that I want (thank you, Two Notes Torpedo and QSC!) – handy, or even necessary, in a 3 piece setting.

I have owned a couple of real ’56 Strats in the last few years, and while both were magical guitars, they were a little strident – in fact, they could shatter glass if you cranked ’em up. My beloved 64/65 Strat, which now resides with my best pal Pete F., on the other hand, was balanced across the range. Why was this so?

The beloved 64/65 “Troiano” Strat

Well, the acoustic properties of an electric guitar are well known to us all – that’s why YOU could hear the difference between a guitar with a loose truss rod and the same guitar with a straight fingerboard and a tight truss rod – yes, you could! So to over-simplify a bit, maple board Strats are brighter and thinner sounding than rosewood board models… often clearer and more articulate too. Ash bodies are also brighter – and if they are light-weight – thinner sounding. An Alder body has a more even tone, with lots of mid-range and smooth highs and big smooth lows. Sure there are other woods, but these are the typical configurations.

Maple Neck / Alder Body

So what I didn’t like about the ’56 Strats was the ash body/maple neck combo. Not to run that sound down – a killer tone you’ll hear on many records – but not MY sound. And it certainly works for Teles!!! In early to mid ’56, the bodies changed to alder, and to me, the ’56s with an alder body and a maple neck sound killer! I have this combination in my current maple neck Strat – and while it’s articulate, it has a smooth top end. My LSL Rosewood board “Strat” is a bit different… it has a gorgeous rosewood neck with rolled edges – a very similar neck to the 64/65 – but a little bigger… however, it has a lightweight swamp ash body that helps give the guitar it’s 6.7lb weight. This guitar rings! I swear you can hear the trem cavity / springs / control and pickup routes … very nuanced, very lively… real “cluck” and just killer… and the rosewood neck tames it just enough! This guitar “talks”! I LOVE it!

LSL Saticoy “Strat” gut shot

One last thought… well, two actually… I’m a big fan of a slightly hotter bridge pickup in a Strat. It takes the edge off and balances well with lower output N and M pickups – 6.5k – 7.5k is ideal. The “Troiano” has that ( a lucky accident?) and so do my Strats featured here. Secondly, I always wire a tone control to the bridge pickup… like a Tele… and just as usable!